Dell PowerEdge VRTX - Manual (Page 589)

IGMP Snooping Commands 589
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IGMP_Snooping.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
User Guidelines
Use this command to define the Multicast transmissions on a Multicast-TV
VLAN. The configuration is only relevant for an Access port that is a member
in the configured VLAN as a Multicast-TV VLAN.
If an IGMP message is received on such an Access port, it is associated with
the Multicast-TV VLAN only if it is for one of the Multicast IP addresses that
are associated with the Multicast-TV VLAN.
Up to 256 VLANs can be configured.
Example
console(config)# ip igmp snooping vlan 1 multicast-tv
239.2.2.2 count 3
ip igmp snooping querier
Use the ip igmp snooping querier Global Configuration mode command to
enable globally the IGMP Snooping querier. Use the no form of this
command to disable the IGMP Snooping querier globally.
Syntax
ip igmp snooping querier
no ip igmp snooping querier
Parameters
N/A
Default Configuration
Enabled
Command Mode
Global Configuration mode
User Guidelines
To run the IGMP Snooping querier on a VLAN, you have enable it globally
and on the VLAN.