Flintec FT-10xx - Manual (Page 16)

FT-10 Smart Process Indicator, Technical Manual, Rev. 1.0, January 2014
Figure 4.4 – RS 485 serial interface connections
Warning: Connect the shield to the reference ground.
Warning: Disconnect IndFace1X PC software before starting Modbus-RTU interfacing.
4.3.5 Analogue Connection (only FT-10 AN )
FT-10AN is programmable to 4 – 20 mA, 0 – 20 mA, 0 – 5 V or 0 – 10 V analogue output types.
Analogue connections are done as indicated in Figure 4.5 and Figure 4.6
Figure 4.5 - FT-10 AN Voltage output connections
Figure 4.6 - FT-10 AN Current output connections
4.3.6 Profibus Connection (only FT-10 PB )
Profibus connection is done as indicated in Figure 4.7.
Figure 4.7 - FT-10 PB serial interface connections