Monroe Electronics R189se - Manual (Page 22)

- 17 -
Setup > Server > Upgrade
4.1.4 Options
Server Debug Log Interface: When enabled, this feature allows detailed debugging
output to be generated during One-Net operation and viewed from the Server >
Debuglogs pages. Check the toggle box to enable, or uncheck to disable. This option
should only be enabled during difficult troubleshooting or under the direction of DAS
customer support. The change is effective after use of the Restart Server button.
Select USB Port Speed Option: If your USB serial ports require a different speed, use
this option to change that.
Setup > Server > Options