Monroe Electronics R189se - Manual (Page 63)

- 58 -
Setup > Net Alerts > EAS NET Configure EAS Web audio streaming
1. Configure EAS NET Clients
Two toggles are displayed for enabling EAS NET during alert forwarding and
origination.
Alert Forwarding to EAS_NET devices: This toggle enables EAS NET send
processing during alert forwarding. It can be enabled / disabled at any time.
Encoder Originated Alerts Sent to EAS_NET devices: This toggle enables
EAS NET send processing during alert origination. It can be enabled / disabled at
any time.
Setup > Net Alerts > EAS NET Configure EAS NET Clients
2. Configure EAS_NET Client Connection
Once enabled, you can create configurations for up to 8 EAS NET clients. Each client
can be independently enabled and disabled, allowing an easy way to stop or restart a
client for a specific region.
If no client configurations exist, or if you want a new one and less than 8 clients exist,
click the Add EAS NET Client Interface button to create a new interface
configuration.
NOTE: At least one of these toggles must be enabled to allow
editing of EAS NET clients. In the screen shot below, both
toggles are enabled.