Monroe Electronics R189se - Manual (Page 58)

- 53 -
 To remove a location from the Configured Available Encoder FIPS Locations,
select a line in the Configured Available Encoder FIPS Locations field and click
Remove Selected.
 All operations are immediate.
 If when encoding an alert on the screen Encoder > Send EAS > General EAS
screen, you find that a FIPS location code is missing, there is a link on that screen
back to the Setup > Encoder > General screen so you can amend the FIPS
pool .
4.9.2 Setup Encoder > Required Tests
Setup > Encoder > Required Tests
The Required Tests sub-page is used to issue pre-configured Weekly Test alerts. The
One-Net
SE
can be configured to send a Required Weekly test with a single button push.
Required Weekly Tests
 The tests can be automatically generated within a daily time frame. You can
configure the test for specific FIPS codes and the duration of the test.
 You can select the box to enable or disable Automatic Random Required Weekly
Test Generation. When enabled you can edit the times and days that you want the