Monroe Electronics R189se - Manual (Page 79)

- 74 -
Setup > Net Alerts > DVS644: Generic Private Descriptor
Alerts for specific FIPS areas and specific EAS Codes can also be filtered before
DVS644 is triggered. See the screenshot below. Set the checkbox to enable/disable FIPS
filtered trigger control. If enabled, select FIPS codes from the provided lists and add to
the client FIPS list. If any of these FIPS are included in the incoming active
forwarded/originated alert, the alert will be sent to this DVS-644 client. With careful use
of this feature, and with multiple clients, one One-Net
SE
can serve many different cable
regions at the same time.
EAS Code filtering can be programmed using the same method as the FIPS code
filtering.
Setup > Net Alerts > DVS644: FIPS code filtering
When done, click on the Accept Changes button to save the configuration.