Monroe Electronics R189se - Manual (Page 42)

- 37 -
Setup > Audio > Radio Tuner
4.6.3 Decoder Audio
There are three features provided to configure decoder audio: Alert Decoding, Decoder
Audio Monitoring, and Alert Forwarding.
Each One-Net
SE
EAS decoder channel can be independently tuned for input sensitivity,
and also can be enabled and disabled with the provided interfaces. The audio devices
used during alert forwarding are also configured from this screen.
Alert Decoding Audio Configuration
Alert decoding occurs from active analysis of the audio input source on the Main and
Auxiliary audio devices. Each stereo input to an audio device allows for two EAS
decoder channels. Therefore the One-Net
SE
provides four decoders. Under the Alert
Decoding Audio Configuration section, each audio device available for the One-Net
SE
is shown with a table that displays:
Decoder Name Audio Input Level (1..100) Audio Level Status Decoder Enable