Monroe Electronics R189se - Manual (Page 99)

- 94 -
That’s basically it. There is an advanced option next to the print button that organizes your printout in
groups of forwarded, decoded and encoded alerts instead of it all being in order by the date, but you
don’t need to enable that in order to print out your reports.
Retrieving your One-Net OpLog:
To retrieve a One-Net Op Log:
1. Log in to the One-Net
2. Go to Server > Logs > Operation Log
For the current days’ log
3. Make sure View Today’s Log is checked.
4. Click (or right-click to save) the hyperlink “Click for Text version of log file” to show the current
day’s file
For archived logs
3. Uncheck the View Today’s Log box.
4. Using the pull-down selection boxes select the Year, Month and Day to retrieve the log. (Note: The
selection boxes show only dates with stored data, therefore not all days may appear.)
5. Click (or right-click to save) the hyperlink “Click for Text version of log file” to show the current
day’s file
Log files will either show on the screen or be saved as a text (.txt) file.
Installing a license key
To install a license key (CAP Plus, for example):
1. Log in to the One-Net
2. Go to Setup > Server > Main/License page
3. Locate the CAP Plus field then insert the license key that should have been given to you in an
email.
The CAP LICENSE KEY below is between the quotes and it is important to verify the serial number
matches the serial number of the unit. Note it is much easier to cut and paste instead of typing, as these
keys are case, space and all character sensitive.
S/N xxxxx CAP PLUS “xxxxxxxxxxxxxxxxxxxxxx”
4. Once the key is copied into the appropriate field, scroll to the bottom of the page and click
"Restart Server"
5. After the software restarts, log back in and verify the field is and shows the word :VALID
NOTE: (Specifically for the CAP Plus Key) The One-Net must be at Version 2.0-0_a03 or above to
provide the FEMA IPAWS interface. The version number shown in the upper right-hand box is only the
first portion of the entire version number. Clicking on the version number will take you to the "About"
page where you will see the "whole" version number. You can download the latest version
at http://www.digitalalertsystems.com/registration_updates.html