Monroe Electronics R189se - Manual (Page 38)

- 33 -
Setup > Email > Decoder Email
Email upon Alert Decoding: Check the box to disable or enable Email on Alert
Decoding. If enabled, enter the Email address in the Email To: field.
Email upon Alert Forwarding: Check the box to disable or enable Email upon Alert
Forwarding. If enabled, enter the Email address in the Email To: field.
Click Accept Changes.
4.5.4 Encoder Email
To setup the outgoing email for the One-Net
SE
encoder events, select Setup Email >
Encoder Email. Email can be sent upon alert origination. Follow screen instructions or
the same method described above for Decoder Email. Click Accept Changes for any
changes to be effective.
Setup > Email > Encoder Email
4.6 Setup > Audio: Audio Levels and Tone Testing
There are four audio screens to configure: Decoder Audio, Encoder Audio, Audio Output
Levels/Tests, and Radio Tuners. Start with Audio Output Levels/Tests.