Monroe Electronics R189se User Manual
Page 75
- 70 -
Assigned Station ID
Use this value to give the server that you are receiving CAP Alerts from an ID that
will appear on the log of Decoded alerts.
CAP alerts with any FIPS codes will be converted to EAS
This option, when enabled, will convert CAP Alerts that are sent to any FIPS location
to EAS on your One-Net. It is recommended that this option is DISABLED because
most often, you don’t need to know all of the cap alerts that are going on around the
country (There are a lot). When this option disabled, enter in the FIPS locations that
you want to receive CAP alerts for. The FCC requires you to receive CAP Alerts for
your county, and your entire state (Not every specific county in the state, but the
option that gives you the entire state FIPS code).
Setup > Net Alerts > CAP Decode; FIPS Codes