Monroe Electronics R189se - Manual (Page 50)

- 45 -
Block Auto-Forward of radio Decoded Weekly Tests
This feature is only used in conjunction with the EAS-NET communications between
One-Nets. Click the box to select or de-select Blocking of Weekly tests received from the
radio receivers of an EAS-NET decode device. The Weekly tests that are received via
EAS-NET will forward.
Auto-Forward or Manual Mode
Click the box to select or de-select Alert Auto-Forwarding or Manual Alert Forwarding.
When Manual forwarding is set, a user of the One-Net
SE
must use the Web Interface to
actively forward the alert from the Decoder Active Decoded list display. During Auto-
Forward mode, the One-Net
SE
will forward alerts without review or intervention.
Duplicate Alert Handling for Decoder Auto-Forwarding
If an incoming EAS alert is determined to be an exact duplicate of a previously decoded
alert, it is completely discarded and a message is logged in the operation log. Alerts that
are duplicates except for Station ID or ORG code are stored as a decoded alert and can be
optionally auto-forwarded or held.
The three selections allow the user to either forward or discard the duplicate alert. An
example of this would be receiving a Required Monthly Test from both LP1 and LP2,
displaying the first alert and discarding the second one.
Configure Update Policy for Active EAS Alerts
This option allows you to expire an active alert when a new alert is decoded and updates
the previous alert. When enabled, you can choose what requirements the new alert must
have to expire the previous active alert.
Setup > Decoder > Forwarding: Duplicate Alert Handling & Update Policy for
Active Alerts
NOTE: Emergency Action Notification (EAN) and Termination (EAT)
alerts always forward automatically.