Monroe Electronics R189se - Manual (Page 52)

- 47 -
To remove a code from the auto-forward list, select a line in the Current Decoder Auto-
Forwarded EAS Codes field and click Remove Selected. All operations are immediate.
Configure FIPS for Decoder Auto-Forwarding
Click the box to select or de-select auto-forwarding for specific FIPS Codes or ALL FIPS
codes.
Specific FIPS Codes
Choose each FIPS location code for the Subdivision, State (or territory) and the County
(or County Equivalent), which should be auto-forwarded. Then click Add. FIPS locations
selected for automatic forwarding will appear in the Current Decoder Auto-Forwarded
FIPS field to the right.
To remove a location from the auto-forward FIPS list, select a line in the Current
Decoder Auto-Forwarded FIPS field and click Remove Selected. All operations are
immediate.
4.8.2 Local Access Forwarding
This feature, when enabled, allows a custom translation of a Civil Emergency Message
when it is received. The main use for this feature is in conjunction with the Monroe
Electronics model 988-telephone device. When an alert is active a cancel button is
displayed on this page so the message can be terminated.
Custom CEM Text Translation
This box is where the actual text that the customer will see is typed. After the message is
typed the “Accept Text Translation Changes” button must be pressed.
Select Decoder Channel
This selection box is where the user programs which of the audio inputs is listened to for
the CEM to be used with the custom translation. All other audio sources will display the
standard translation of the CEM message.
Message Display Control
This selection determines how the message is repeated.
NOTE: When choosing the FIPS codes that you would like to filter, be sure to
choose the entire state FIPS code. This will not send you alerts for every
county, but rather it will filter in alerts that apply to the whole state. For
example: New York (036000) in the previous screenshot.