39 flashshow, Flashshow, Motload commands – Artesyn MOTLoad Firmware Package User's Manual (February 2015) User Manual
Page 103
Advertising
MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D)
103
3.1.39 flashShow
Name
flashShow—displays all MOTLoad configured Flash devices.
Synopsis
flashShow -d
Parameters
-d Ps: Device Name (Default = All Flash Memory Devices)
Example
The following example indicates a typical display when using the flashShow command.
MOTLoad> flashShow
Device-Name Base-Address,Size Device-Size,Count Boot Type
/dev/flash0 F2000000,02000000 01000000,00000002 Yes Intel 28F128
/dev/flash1 FF800000,00200000 00080000,00000004 No AMD 29LV040
Error Messages
open() on "<device>" failed, errno <value>
Unable to open Flash device node.
ioctl(101) on "<device>" failed, errno = <value>
Unable to read Flash memory configuration.
See Also
Advertising