Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 137)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 137
3.1.64 netShut
Name
netShut—disables a MOTLoad configured network device.
Synopsis
netShut [-d]
Warning
Exercise caution when using this command. A board reset is the only way to reactivate
the network interface, and some errors messages may result in the meantime, if any
operations take place while the network is disabled.
Parameters
-d Ps: Device Name (Default=All Network Interfaces)
Example
The following example indicates a typical display when using the netShut commands.
MOTLoad> netShut
/dev/enet0 Disabled
Error Messages
open() failed, errno = <value>
Device improperly opened.
ioctl(123) failed, errno = <value>
Device reset failed.
See Also
netBoot
,
netShow
,
netStats
,
tftpGet