Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 175)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 175
3.1.90 testNvramRd
Name
testNvramRd—validates read operations to an NVRAM device.
Synopsis
testNvram [-d] [-i] [-o]
Parameters
-d Ps: Device Name (Default = /dev/nvram)
-n Pd: Number of Bytes (Default = Entire Device)
-o Pd: Starting Byte Offset (Default = 0)
Example
The following example indicates a typical display when using the testNvramRd command.
MOTLoad> testNvramRd -d/dev/nvram -n20
MOTLoad> testStatus
Passed (ePID=00000020): testNvramRd -d/dev/nvram -n20
See Also
testNvramRdWr