A.3.3 viewing gev values, A.3.4 viewing gev labels, A.3.3 viewing gev values a.3.4 viewing gev labels – Artesyn MOTLoad Firmware Package User's Manual (February 2015) User Manual
Page 243: Motload non-volatile data
MOTLoad Non-Volatile Data
MOTLoad Firmware Package User’s Manual (6806800C24D)
243
A.3.3
Viewing GEV Values
All GEVs currently stored in NVRAM may be viewed with the gevShow command. The order of
the GEVs is the order in which they were created. Each GEV is shown as label=value. If the value
is comprised of more than one line of data, the label is shown on a separate line, above the
value line(s).
gevShow
example1=Hi 12345 Hi
example2=Come Back Soon
jazz=
a
b
c
e
d
g
e
t
lkjkj
jsjs
ieie
vnvnv
s’s’s’s
c
apple=apple GEV
jazz3=short jazz3
example3=August 7, 2002
Total Number of GE Variables =6, Bytes Utilized =160, Bytes Free =3432
A.3.4
Viewing GEV Labels
The labels of all currently-defined GEVs can be listed with the gevList command. The order of
the GEVs are in the order in which they were created as:
gevList
example1
example2
jazz