Motload commands – Artesyn MOTLoad Firmware Package User's Manual (February 2015) User Manual
Page 218
Advertising
MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D)
218
transparentMode(): ioctl(101) failed, errno = <value>
Unable to determine current mode of port.
transparentMode(): ioctl(100) failed, errno = <value>
Unable to set port mode.
transparentMode(): ioctl(102) failed, errno = <value>
Unable to set port baud rate.
transparentMode(): ioctl(122) failed, errno = <value>
Unable to flush port's read data buffers.
transparentMode(): ioctl(123) failed, errno = <value>
Unable to flush port's write data buffers.
write() failed
Failed write to duplicate port.
read() failed
Failed to read from console port.
See Also
Advertising