Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 68)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 68
3.1.21 csUserAltBoot
Name
csUserAltBoot—checksums user boot images specified in the alternate boot image header at
the beginning of files to be programmed into flash memory. As part of the process, the
command executes validity checks to insure the integrity of the boot image header before
calculating the checksum. Files up to six megabytes can use this command to provide the
checksum needed by MOTLoad in order to pass program execution to the user defined image.
Synopsis
csUserAltBoot [-a]
Parameters
-a Ph: Starting Address (Default = User Download Buffer)
Example
The following examples show typical results of entering the csUserAltBoot command.
MOTLoadI> csUserAltBoot -a5000000
checksum = 52628d9f
MOTLoadI>