80 sromwrite, Sromwrite, Motload commands – Artesyn MOTLoad Firmware Package User's Manual (February 2015) User Manual
Page 160
MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D)
160
3.1.80 sromWrite
Name
sromWrite—writes the contents of a memory buffer to an SROM device, as specified by the
command line arguments.
Synopsis
sromWrite [-a] -d [-n] [-o]
Parameter
-a Ph: Address of Data Buffer (Default = User Download Buffer)
-d Ps: Device Name
-n Ph: Number of Bytes (Default = Entire Device)
-o Ph: Starting Byte Offset (Default = 0)
Example
The following example indicates a typical display when using the sromWrite command.
MOTLoad> mmb -a00560000
00560000 FF? 12
00560000 FF? 34
00560000 FF? 56
00560003 FF? .
MOTLoad> sromWrite -d/dev/i2c0/srom/AA -n4
Device ID = /dev/i2c0/srom/AA
Source Starting Address = 0x00560000
Destination Offset = 0x00000000
Number of Effective Bytes = 0x00000020
Program SROM Memory (Y/N)? y
Writing SROM contents... Write Complete