Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 226)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 226
vpdDisplay(): unsupported device type
VPD device is not an SROM.
vpdDisplay(): ioctl(103) failed, errno = value
Unable to determine block size of SROM.
vpdDisplay(): ioctl(104) failed, errno = <value>
Unable to retrieve number of blocks in VPD device.
vpdDisplay(): malloc() failed
Unable to malloc an internal buffer for VPD.
vpdDisplay(): read() failed, status = <value>, errno = <value>
Read error in SROM device.
vpdDisplay(): VPD header failure (eye catcher)
VPD eye catcher doesn't match default.
vpdDisplay(): warning: VPD header failure (size)
Mismatch of size parameters for VPD.
vpdDisplay(): VPD CRC failure
VPD CRC fails.
See Also
vpdEdit
Refer also to Appendix A, MOTLoad Non-Volatile Data, on page 231