Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 111)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 111
3.1.44 gevEdit
Name
gevEdit—creates and modifies (edits) a MOTLoad environment variable.
Synopsis
gevEdit name
name is the name of the MOTLoad global variable to be edited
Parameters
No parameters
Example
The following example indicates a typical display when using the gevEdit command.
MOTLoad> gevEdit mot-boot-path
(Blank line terminates input.)
/dev/fd0[\l[\\boot.bin]]
MOTLoad>
Error Messages
PReP NVRAM header test failed
Corrupted or uninitialized GEV area in NVRAM, run gevInit to correct.
See Also
gevDelete
,
gevDump
,
gevInit
,
gevShow
Refer also to Appendix A, MOTLoad Non-Volatile Data, on page 231