Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 114)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 114
3.1.47 gevShow
Name
gevShow—displays the name(s) and value(s) of the MOTLoad global environment variable(s)
that are contained in the NVRAM. If the optional [name] argument is omitted, all the
environment variables are shown.
Synopsis
gevShow
No argument description
Parameters
No parameters
Example
The following example indicates a typical display when using the gevShow command.
MOTLoad> gevShow
mot-boot-path=/dev/fd0[\l[\\boot.bin]]
Total Number of GE Variables =1, Bytes Utilized =39, Bytes Free =2273
Error Messages
PReP NVRAM header test failed
Corrupted or uninitialized GEV area in NVRAM, run getInit to correct.
See Also
gevDelete
,
gevDump
,
gevEdit
,
gevShow
Refer also to Appendix A, MOTLoad Non-Volatile Data, on page 231