Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 53)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 53
blockVerify(): open(<source/destination device/node>) failed, errno = <value>
Unable to open either source or destination device/node.
blockVerify(): ioctl(103) failed, errno = <value>
Unable to get block size of source/destination device/node.
blockVerify(): bseek() failed, errno = <value>
Unable to seek to either source/destination starting block number.
blockVerify(): unequal block sizes not supported
Block size of source and destination are not equal.
blockVerify(): read() failed, status = <value>, errno = <value>, device = <value>
Unable to read from either source/destination device/node.
See Also
blkCp
,
blkFmt
,
blkRd
,
blkShow
,
blkWr