Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 30)

Using MOTLoad
MOTLoad Firmware Package User’s Manual (6806800C24D) 30
-a P*: Executive Process/Task Identifier of Entry to Display
-n P*: Number of Entries to Display
-s P*: Specific Entry Number (1 to n) to Display
Example
This field shows how the command, test, or utility is typically used. The command line
invocation of the command, test, or utility and the subsequent displayed results are
shown. In some cases extensive examples are provided, for example:
MOTLoad> errorDisplay
tName =testDisk -d/dev/ide0/hdisk2 -n5000
sPID=00000011 ePID=00000014 eS.eM = 2.1 entryNo = 00000001
sErrNo=00000000 eErrNo=0C0000002C errCnt=00000001 loopCnt-00000000
sTime=43:48:15 fTime=43:48:15 eTime=00:00:00 1Time=15:51:54
Error Messages:
Data Comparison Failure in Block Range 0-255
Write/Read Date: 05F0436F/00000000
Write/Read Address: 008E1000/00*C0000
Device-Name =/dev/ide0/hdisk2
Error Messages
This field shows the known error messages output by MOTLoad. This field is only
applicable to commands, not tests.
Assembler Error:error code = <value>
Error code not in table
See Also
This field lists tests/utilities that are functionally related to the described command, for
example: clear, testStatus