86 td, Motload commands – Artesyn MOTLoad Firmware Package User's Manual (February 2015) User Manual
Page 170
Advertising
MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D)
170
3.1.86 td
Name
td—trace single-steps through a user-program to the specified address.
Synopsis
td -a [-c]
Parameters
-a Ph: Address
-c Pd: Count (Default = 1)
Example
The following example indicates a typical display when using the td command.
MOTLoad>td
See Also
,
,
Advertising