Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 64)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 64
3.1.18 clear
Name
clear—clears the tables specified by the command-line options. By default this command
clears the MOTLoad command history buffer.
Synopsis
clear [-c] [-e] [-h]
Parameters
-c 0: Test Completion (Pass/Fail) Status History Table
-e 0: Test Error (Error Messages) Status History Table
-h 0: Command-Line History Table
Example
The following example indicates a typical display when using the clear command.
MOTLoad> errorDisplay
tName =testDisk -d/dev/ide0/hdisk2 -n5000
sPID=00000011 ePID=00000014 eS.eM=2.1 entryNo=00000001
sErrNo=00000000 eErrNo=0C00002C errCnt=00000001 loopCnt=00000000
sTime=43:48:15 fTime=43:48:15 eTime=00:00:00 lTime=15:51:54
Error Messages:
Data Comparison Failure in Block Range 0-255
Write/Read Data : 05F0436F/00000000
Write/Read Address: 008E1000/00*C0000
Device-Name = /dev/ide0/hdisk2
MOTLoad> clear -e
See Also
errorDisplay
,
hbd
,
hbx
,
testStatus