Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 193)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 193
3.1.105 testRtcReset
Name
testRtcReset—ensures the RTC is capable of generating a board level reset. The test proceeds
as follows: (1) Set the time delay to 1 second. (2) Set the RTC’s watchdog timer to drive the
reset pin. (3) Start the watchdog timer. (4) Wait up to 4 seconds for a reset to occur. (5) If no
reset is generated, log an error indicating the occurrence, and report the watchdog expiration
status. (6) Disable the operation of the RTC watchdog.
Synopsis
testRtcReset [-d]
Parameters
-d Ps: Device Name (Default = /dev/rtc)
Example
The following example indicates a typical display when using the testRtcReset command.
MOTLoad> testRtcReset
See Also
testRtcRollOver
,
testRtcTick