Artesyn MOTLoad Firmware Package User's Manual (February 2015) - Manual (Page 228)

MOTLoad Commands
MOTLoad Firmware Package User’s Manual (6806800C24D) 228
vpdEdit(): ioctl(103) failed, errno = <value>
Unable to determine block size of SROM.
vpdEdit(): ioctl(104) failed, errno = <value>
Unable to retrieve number of blocks in VPD device.
vpdEdit(): malloc() failed
Unable to malloc an internal buffer for VPD.
vpdEdit(): write() failed, status = <value>, errno = <value>
Unable to write SROM.
vpdEdit(): close() failed, status = <value>, errno =
Failed to close SROM device.
See Also
vpdDisplay
Refer also to Appendix A, MOTLoad Non-Volatile Data, on page 231