Turning on / off or rebooting the device, System requirements – ACTi XNR-4200 V1.02.13 User Manual
Page 11
XNR-4200 User’s Manual 1.02.13
Turning On / Off or Rebooting the device
1. To turn on your XNR, press down the Power-On Button on the front side.
2. To turn off or reboot, go to Setup→
Power, and click “Shutdown” to turn off your XNR or
“Reboot” to reboot it.
System Requirements
XNR-4200 itself is a self-contained unit. The system requirement here applies only to the
Client PC used to view video and access settings.
PC Specifications
1-16 channels
17-64 channels
CPU
Intel Core 2 Quad 2.66 GHz, 32/64-bit
Intel Core i7-920 2.67 GHz 64-bit
Memory
4GB RAM
6GB RAM
Operating System
32/64 bit: Windows 7 (all versions), Windows Server 2008 (all versions),
Windows Vista (all versions), Windows Server 2003 (all versions), Windows
XP (all versions)
Browser
Microsoft Internet Explorer 8.0 or 9.0
These specifications are based on following camera settings:
Scenario 1: 1280x1024, 3Mbps, 18fps, MPEG-4;
Scenario 2: 1280x1024, 1.5Mbps, 18fps, H.264.
In case of high number of channels, you may use "Decode I" mode on live view. For more
details about system requirements, please refer to Project Planner on