ACTi XNR-4200 V1.02.13 - Manual (Page 8)

www.acti.com
XNR-4200 User’s Manual 1.02.13
8
Front View (Panel Open)
1. Power Switch: Press and hold for a few seconds before system reboots automatically
2. Reset Button: To restore to default settings, please follow the below steps:
(1) Power on the device, then press and hold this button.
(2) Count 45 seconds and observe the system status LED in the mean while, as it is
quickly blinking, release the Reset button.
(3) The System Status LED will turn stable, then the device will load the default settings
and restart.
If you just want to shutdown or reboot XNR, please use the software interface Shutdown
Button or Reboot Button (Setup→Power) instead.
3. USB Port: The two USB ports allow external DVD-ROMs to be connected to XNR. You
may backup data through external DVD drives.
4. HDD Bay: The 6 HDD bays each contain one HDD tray. The tray is removable from the
front panel.
Power
Switch
Reset
Button
USB Port
HDD Bays
Slide Lock Tab Hinged Insert Tab
Locking
Keyhole