Adding video streams from a multi-channel device – ACTi XNR-4200 V1.02.13 User Manual
Page 73
XNR-4200 User’s Manual 1.02.13
After the device is connected, you can get the live view.
The “Cancel” button turns to “Delete”, and you can click it to delete this device.
Note
: On a single device setting page, please remember to click “Save” to save the settings
after you have done all the configurations.
Adding Video Streams from a Multi-channel Device
There are devices that output more than one video streams to XNR-4200. For example, a
video encoder converts a number of analog video signals into the same amount of IP video
streams; certain high megapixel cameras such as ACTi KCM-5111, supports outputting
multiple VGA streams cropped from a single high resolution video source. These multiple
streams come from a single device are managed as different cameras by SNVR server.
To add these streams as multiple channels for you to view and record, please:
1. Select the desired stream mode
in “Stream Mode” on Device Basic Setting page.
2. The
“Channel No” column will display for you to input the stream ID ( the same with
your setting on Device)
3. After
configuration, click “Save”.