ACTi XNR-4200 V1.02.13 - Manual (Page 61)

www.acti.com
XNR-4200 User’s Manual 1.02.13
61
Settings-FTP
Please fill up the information about the FTP server you wish to connect to. After configuring,
please click „Save‟ to save setting the device. Please take below sample as a reference.
1. Server: Please enter the IP address of FTP server
2. Folder: Please enter the upload path of the file
3. Port: Please enter the FTP port number
4. Account: Please enter the user name of the account.
5. Password: Please enter the password of the account.
6. The FTP works in two very different manners, Active mode and Passive mode.
If your FTP server is behind the firewall or a NAT router, you have to use “Passive”
mode.
Settings-Global Settings
A few of the parameters that cannot be easily categorized are listed here for editing.
1. Patrol Interval (sec): The interval of live view patrol, default is 10 sec.
2. Manual Record (sec): Manual recording duration Default is 300 sec.
3. Number of Events: The max number events that can be displayed in event panel.
Default is 30.