Accessing xnr-4200 by upnp – ACTi XNR-4200 V1.02.13 User Manual
Page 13
XNR-4200 User’s Manual 1.02.13
Accessing XNR-4200 by UPnP
XNR-4200 supports UPnP connection. This means that once the device has an IP address,
you will be able to find it in the local network in Windows Explorer
→ Network. Please note that
your PC must be in the same subnet as the Standalone NVR. A sample screen (in windows 7)
is shown below. Double-click the icon to log into Standalone NVR.
Next to the XNR-4200 title, the MAC address to this Standalone NVR is shown here. You will
need to provide this MAC address to your sales representative if you are registering offline. If
you
have internet connection and choose to register online, then you don‟t need to worry about
the MAC address.
XNR-4200 Detected over Local Network by UPnP
If your default browser is other than IE8.0 or 9.0, right-click on the icon to bring up the context
menu, and select “Properties”, find the IP address and port number next to “Device Webpage”
and input them in your IE browser.
The IP Address and Port Number