Search devices, Add device manually – ACTi XNR-4200 V1.02.13 User Manual
Page 72
XNR-4200 User’s Manual 1.02.13
You may either let standalone NVR search for devices automatically, or you may direct the
search with more detail via manual add. We recommend Auto Search for devices located in the
same LAN, and you should only manually add device when they are located over the internet.
Search Devices
Selecting Search Devices will bring you to the page where you decide which supplier‟s camera
to search. Click from the drop down menu and select the brand of devices to search. Then click
„Search‟ button to start searching.
After searching is done, you will see all the devices that can be found in the network. Please
click on the devices that you wish to add and the selected devices will be highlighted in yellow.
After you have selected all required devices, please click „Submit‟ button to add the device.
Then you will see it/them shown in the „All Device‟ group.
Add Device Manually
Once you click „Add Device Manually‟, you will go to the basic page of a new camera as below.
Please fill up the fields, such as „Brand, „Model‟, and „IP Address‟. System will automatically
assign a default value for other fields. If there is any field you need to change, please modify it
now.
After clicking “Save”, XNR-4200 will get connect this device.