ACTi XNR-4200 V1.02.13 User Manual
Page 76
XNR-4200 User’s Manual 1.02.13
Name: The displayed name of the device. You can enter any name you want.
Brand: The manufacturer of the device.
Model: The model number of the device.
Stream Mode: For devices that support multi-streaming, you can change the
modes here.
Default Live View Stream (displayed after you selected Dual Stream in
the previous column): Choose Stream1 or Stream 2 for live view, usually
Stream 1 with lower video format.
Recording Stream (displayed after you selected Dual Stream in the
previous column): Choose Stream1 or Stream 2 for recording, usually
Stream 2 with better video format.
Protocol: Please select the streaming method of the device
IP Address: The IP address assigned to the device
HTTP Port: Please enter the port number that is set for the device to use
HTTP protocol.
Streaming Port: Please enter the port number that is set to stream video
from device. The default value is 6002.
Control Port: Please enter the port number that is used to control the device.
The default value is 6001.
User Name: The user name used to log in the device
Password: The password used to log in the device
Channel ID:
The Channel ID is the ID of video server‟s channel. If the device
is camera, its channel ID would be 1.
Open the camera firmware page.