ACTi XNR-4200 V1.02.13 User Manual
Page 37
XNR-4200 User’s Manual 1.02.13
PTZ Panel
The PTZ Panel allows you to control camera motion for Pan / Tilt / Zoom enabled cameras.
This is called the optical PTZ mode, in contrast with the digital PTZ available to all cameras via
Standalone NVR.
1.
Minimize: Minimizes the PTZ window.
2.
Pan-Tilt Control: Click on the arrows to point camera at a given direction. Click and hold
until you arrive at the position you desire.
3.
Pan Speed: Adjust Pan Speed from 1 to 5, higher the number, faster the speed.
Caution: Speed varies from protocol to protocol.
Tilt Speed: Adjust Tilt Speed from 1 to 5, higher the number, faster the speed.
Caution: Speed varies from protocol to protocol.
Zoom Speed: Adjust Zoom Speed from 1 to 5, higher the number, faster the speed.
Caution: Speed varies from protocol to protocol.
4.
Go to Preset: Make PTZ camera go to preset points. (Only available when you have
done PTZ and Preset Points settings for a PTZ or speed dome camera).
5.
Preset Tour: Make PTZ camera cycle through grouped multiple preset points. (Only
available when you have done PTZ and Preset Points settings for a PTZ or speed dome
camera).
6.
Zoom Out: Zoom out.
7.
Focus In: Focus near.
8.
Zoom In: Zoom in.
9.
Focus Out: Focus far.