Raid management, Disk status – ACTi XNR-4200 V1.02.13 User Manual
Page 67
Advertising
XNR-4200 User’s Manual 1.02.13
Unblock all the IP address in the list
When you wish to unblock all the IP, please click
„Remove All‟ button to remove all of
them from the list.
RAID Management
During normal operation, it is important that you cannot remove any disk from the device,
or it might cause damage to the disk. However, there are certain conditions that you need to
switch the disks.
You can observe the disk and RAID status on RAID setting page.
Disk Status
The disk status displays the disks conditions as follows:
1.
Unused
: needs formatting before being used.
2.
Normal
: formatted and ready to use(before Resync) / in use (after Resync)
3.
Error
: detected but cannot be read or written
Disk
Status
RAID
Status
Advertising
This manual is related to the following products: