ACTi XNR-4200 V1.02.13 - Manual (Page 77)

www.acti.com
XNR-4200 User’s Manual 1.02.13
77
Video Quality
If you selected “Single” stream mode on Device Basic Setting page, only one set of video
profile is configurable here; if you selected “Dual” stream mode, you get to set both stream and
stream 2 video configurations.
 TV Standard: You can choose NTSC or PAL format f here, the default will use
device setting.
 Stream Mode: This column is not configurable, for it only displays the mode
you selected on Basic Device setting page.
 Video Encoder: Choose different encoders here, the default will use device
setting. If you choose “MJPG”, the “Video Quality” column will display for you
to set video quality from 1~100.
 Resolution: The video resolution of the IP device
 Frame Rate: The frame rate of the video streaming
 Max Bitrate: If you choose “Unlimited”, the “Bitrate” column will display for
you to set the target bitrate that the camera will attempt to provide when using
constant bitrate mode