Date and time – ACTi XNR-4200 V1.02.13 User Manual
Page 22
Advertising
XNR-4200 User’s Manual 1.02.13
Date and Time
You can setup the date and time setting on this stage. ACTI Standalone NVR provides three
methods to synchronize the time setting; you can use NTP server, local time setting or you can
setup it manually. The methods are as follows:
Setup by using NTP server:
STEP 1: Fill in the NTP server IP or domain name.
STEP 2:
Press the “NTP Sync” button to synchronize your time setting with NTP server.
Setup by local time:
Just press the “Local Sync” button to synchronize your time setting with your computer‟s local
time.
Setup manually:
Pressing “Date” or “Time” button to setup your date or time manually.
Advertising
This manual is related to the following products: