Date & time – ACTi XNR-4200 V1.02.13 User Manual
Page 63
XNR-4200 User’s Manual 1.02.13
Date & Time
You can configure date and time of the device in this section.
1.
Time Zone: Select the Time Zone where the device belongs to. After selecting the time
zone, it will change to the corresponding date and time.
2.
Date & Time: It shows the current date and time on the device.
3.
Daylight Saving: If the device is located in an area where daylight saving time is used,
click the check box to enable daylight saving. The time will be automatically adjusted.
When the daylight saving time has finished, uncheck the box to return to original setting.
4.
NTP Server: Please enter a NTP server address if you wish to synchronize time with the
NTP server.
5.
„NTP Sync‟ Button: It is for synchronizing the clocks of computers over network. After
you enter any NTP server, please click this button to start synchronizing.
6.
„Local Sync‟ Button: If you wish to sync the device time with the time on the PC you are
using now, please click this button.
7.
„Date‟ Button: If you don‟t have any NTP server and want to manually modify the date,
please click this button and then a calendar as below will pop up. You have to select the
date you wish to set.