H3C Technologies H3C S10500 Series Switches - Manual (Page 162)

147
• Determine the C-RP timeout.
• Determine the C-BSR priority.
• Determine the hash mask length.
• Determine the ACL rule defining a legal BSR address range.
• Determine the BS period.
• Determine the BS timeout.
• Determine the ACL rule for register message filtering.
• Determine the register suppression time.
• Determine the register probe time.
• Determine the ACL rule and sequencing rule for disabling an SPT switchover.
Enabling PIM-SM
With PIM-SM enabled, a router sends hello messages periodically to discover PIM neighbors and
processes messages from the PIM neighbors. To deploy a PIM-SM domain, enable PIM-SM on all
non-border interfaces of the routers.
Enabling PIM-SM globally on the public network
Follow these steps to enable PIM-SM on the public network:
To do... Use the command... Remarks
Enter system view system-view —
Enable IP multicast routing multicast routing-enable
Required
Disabled by default.
Enter interface view
interface interface-type
interface-number
—
Enable PIM-SM pim sm
Required
Disabled by default.
Enabling PIM-SM in a VPN instance
Follow these steps to enable PIM-SM in a VPN instance:
To do... Use the command... Description
Enter system view system-view —
Create a VPN instance and enter
VPN instance view
ip vpn-instance vpn-instance-name —
Configure an RD for the VPN
instance route-distinguisher
route-distinguisher Required
Not configured by default.
Enable IP multicast routing multicast routing-enable
Required
Disabled by default.
Enter interface view
interface interface-type
interface-number
—