H3C Technologies H3C S10500 Series Switches - Manual (Page 245)

230
routing information displayed on Switch B with that displayed on Switch D, you can see that Switch D acts
now as the RP for Source 2 and Host B.
# View the PIM routing information on Switch B.
[SwitchB] display pim routing-table
No information is output on Switch B.
# View the PIM routing information on Switch D.
[SwitchD] display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
RP: 10.1.1.1 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:12:07
Upstream interface: Register
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface200
Protocol: igmp, UpTime: 00:12:07, Expires: -
(10.110.6.100, 225.1.1.1)
RP: 10.1.1.1 (local)
Protocol: pim-sm, Flag: SPT 2MSDP ACT
UpTime: 00:40:22
Upstream interface: Vlan-interface104
Upstream neighbor: 10.110.4.2
RPF prime neighbor: 10.110.4.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface200
Protocol: pim-sm, UpTime: - , Expires: -
SA message filtering configuration
Network requirements
• As shown in Figure 65 , three PIM-SM domains exist in the network, and OSPF runs within and
among the domains to provide unicast routing.
• Loopback 0 is configured as a C-BSR and a C-RP in the related PIM-SM domains on Switch A,
Switch C, and Switch D, respectively.
• An MSDP peering relationship is set up between Switch A and Switch C and between Switch C and
Switch D.
• Source 1 sends multicast data to multicast groups 225.1.1.0/30 and 226.1.1.0/30, and Source 2
sends multicast data to multicast group 227.1.1.0/30.