H3C Technologies H3C S10500 Series Switches - Manual (Page 430)

415
Priority: 64
Hash mask length: 126
State: Elected
Scope: 14
Uptime: 00:01:11
Next BSR message scheduled at: 00:00:49
Candidate BSR Address: 8001::1
Priority: 64
Hash mask length: 126
State: Elected
Scope: 14
Candidate RP: 8001::1(Vlan-interface109)
Priority: 192
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:55
To view the RP information learned on a switch, use the display pim ipv6 rp-info command. For example:
# View the RP information on Switch B.
[SwitchB] display pim ipv6 rp-info
PIM-SM BSR RP information:
prefix/prefix length: FF0E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF1E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF2E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FF3E::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51