H3C Technologies H3C S10500 Series Switches - Manual (Page 265)

250
To do… Use the command… Remarks
Configure the router as a route
reflector and specify an MBGP
peer or a peer group as its client
peer { group-name | peer-address }
reflect-client
Required
Not configured by default.
Enable route reflection between
clients
reflect between-clients
Optional
Enabled by default.
Configure the cluster ID of the route
reflector
reflector cluster-id cluster-id
Optional
By default, a route reflector uses its
router ID as the cluster ID.
CAUTION:
•
In general, it is not required that clients of a route reflector be fully meshed. The route reflector forwards
routing information between clients. If clients are fully meshed, you can disable route reflection between
clients to reduce routing costs.
• In general, a cluster has only one route reflector, and the router ID of the route reflector identifies the
cluster. You can configure multiple route reflectors to improve network stability. In this case, you need to
specify the same cluster ID for these route reflectors to avoid routing loops.
Displaying and maintaining MBGP
Displaying MBGP
To do… Use the command… Remarks
Display the IPv4 MBGP
routing table display ip multicast routing-table [ verbose] [ | { begin |
exclude | include } regular-expression ] Available in any
view
Display the IPv4 MBGP
routing information matching
the specified destination IP
address
display ip multicast routing-table ip-address
[ mask-length | mask ] [ longer-match ] [ verbose ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view
Display MBGP peer group
information
display bgp multicast group [ group-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view
Display the advertised
networks display bgp multicast network [ | { begin | exclude |
include } regular-expression ] Available in any
view
Display AS path information
display bgp multicast paths [ as-regular-expression | |
{ begin | exclude | include } regular-expression ] Available in any
view
Display MBGP peer
information or peer group
information
display bgp multicast peer [ [ ip-address ] verbose ] [ |
{ begin | exclude | include } regular-expression ] Available in any
view
Display the prefix entries in
the ORF information from the
specified BGP peer
display bgp multicast peer ip-address received ip-prefix
[ | { begin | exclude | include } regular-expression ] Available in any
view
Display MBGP routing
information
display bgp multicast routing-table [ ip-address [ { mask
| mask-length } [ longer-prefixes ] ] ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view