H3C Technologies H3C S10500 Series Switches - Manual (Page 355)

340
To do… Use the command… Remarks
Configure the maximum response
delay for MLD general query
messages
max-response-time interval
Required
10 seconds by default.
Configure the MLD last listener
query interval
last-listener-query-interval interval
Required
1 second by default.
Configure the MLD other querier
present interval timer other-querier-present
interval
Required
By default, the other querier
present interval is determined by
the formula “Other querier present
interval (in seconds) = [ MLD query
interval ] × [ MLD querier’s
robustness variable ] + [ maximum
response delay for MLD general
query ] /2”.
Configuring MLD query and response parameters on an interface
Follow these steps to configure MLD query and response parameters on an interface:
To do… Use the command… Remarks
Enter system view system-view —
Enter interface view
interface interface-type
interface-number
—
Configure the MLD querier’s
robustness variable
mld robust-count robust-value
Required
2 times by default.
Configure the startup query
interval
mld startup-query-interval interval
Required
By default, the startup query
interval is 1/4 of the “MLD query
interval”.
Configure the startup query count mld startup-query-count value
Required
By default, the startup query count
is the same as the robustness
variable.
Configure the MLD query interval mld timer query interval
Required
125 seconds by default.
Configure the maximum response
delay for MLD general query
messages
mld max-response-time interval
Required
10 seconds by default.
Configure the MLD last listener
query interval mld last-listener-query-interval
interval Required
1 second by default.