Network requirements – H3C Technologies H3C S10500 Series Switches User Manual

Page 306

Advertising
background image

291

Total 1 IP Group(s).

Total 1 IP Source(s).

Total 1 MAC Group(s).

Port flags: D-Dynamic port, S-Static port, C-Copy port, P-PIM port

Subvlan flags: R-Real VLAN, C-Copy VLAN

Vlan(id):100.

Total 1 IP Group(s).

Total 1 IP Source(s).

Total 1 MAC Group(s).

Router port(s):total 1 port(s).

GE1/0/1 (D) ( 00:01:23 )

IP group(s):the following ip group(s) match to one mac group.

IP group address:FF1E::101

(::, FF1E::101):

Host port(s):total 1 port(s).

GE1/0/3 (D)

MAC group(s):

MAC group address:3333-0000-0101

Host port(s):total 1 port(s).

GE1/0/3

IPv6 multicast source and user control policy configuration

example

Network requirements

As shown in

Figure 74

, Switch A is a Layer-3 switch. It connects to IPv6 multicast sources (Source 1

and Source 2) through VLAN-interface 101 and VLAN-interface 102, respectively. It connects to the

RADIUS server through VLAN-interface 103 and to the Layer-2 switch (Switch B) through

VLAN-interface 104.

MLDv1 runs on Switch A and MLDv1 snooping runs on Switch B. Multicast sources and hosts run
802.1X client.

An IPv6 multicast source control policy is configured on Switch A to block multicast flows from
Source 2 to FF1E::101. An IPv6 multicast user control policy is configured on Switch B so that Host

A can join or leave only multicast group FF1E::101.

Advertising