Configuring pim-ssm – H3C Technologies H3C S10500 Series Switches User Manual

Page 182

Advertising
background image

167

Configure C-BSRs for each admin-scope zone and the global-scope zone.

1.

Configure C-BSRs for each admin-scope zone

Perform the following configuration on the routers that you want to configure as C-BSRs in admin-scope

zones.
Follow these steps to configure a C-BSR for an admin-scope zone:

To do…

Use the command…

Remarks

Enter system view

system-view

Enter public network PIM view or
VPN instance PIM view

pim [ vpn-instance
vpn-instance-name ]

Configure a C-BSR for an
admin-scope zone

c-bsr group group-address { mask |
mask-length
} [ hash-length

hash-length | priority priority ] *

Required
No C-BSRs are configured for an
admin-scope zone by default.

NOTE:

The

group-address { mask | mask-length } parameter of the c-bsr group command can specify the

multicast groups the C-BSR serves, in the range of 239.0.0.0/8.

2.

Configure C-BSRs for the global-scope zone

Perform the following configuration on the routers that you want to configure as C-BSRs in the

global-scope zone.
Follow these steps to configure a C-BSR for the global-scope zone:

To do…

Use the command…

Remarks

Enter system view

system-view

Enter public network PIM view or
VPN instance PIM view

pim [ vpn-instance
vpn-instance-name ]

Configure a C-BSR for the
global-scope zone

c-bsr global [ hash-length
hash-length | priority priority ] *

Required
No C-BSRs are configured for the
global-scope zone by default.

NOTE:

You can configure the hash mask length and C-BSR priority globally, in an admin-scope zone, and in the
global scope zone.

The values configured in the global scope zone or admin-scope zone have preference over the global
values.

If you do not configure these parameters in the global scope zone or admin-scope zone, the
corresponding global values will be used.

For configuration of global C-BSR parameters, see “

Configuring global C-BSR parameters

.”

Configuring PIM-SSM

NOTE:

PIM-SSM needs the support of IGMPv3. Be sure to enable IGMPv3 on PIM routers with multicast receivers.

Advertising