H3C Technologies H3C S10500 Series Switches User Manual

Page 89

Advertising
background image

74

Configure the IP address and subnet mask for each interface as per

Figure 25

. (details not shown)

2.

Configure Router A

# Enable IP multicast routing, enable PIM-DM on each interface, and enable IGMP on the host-side

interface GigabitEthernet 1/0/2.

<RouterA> system-view

[RouterA] multicast routing-enable

[RouterA] interface gigabitethernet 1/0/1

[RouterA-GigabitEthernet1/0/1] pim dm

[RouterA-GigabitEthernet1/0/1] quit

[RouterA] interface gigabitethernet 1/0/2

[RouterA-GigabitEthernet1/0/2] pim dm

[RouterA-GigabitEthernet1/0/2] igmp enable

3.

Configure Switch A

# Enable IGMP snooping globally.

<SwitchA> system-view

[SwitchA] igmp-snooping

[SwitchA-igmp-snooping] quit

# Create VLAN 10, assign GigabitEthernet 1/0/1 to VLAN 10, and enable IGMP snooping in this
VLAN.

[SwitchA] vlan 10

[SwitchA-vlan10] port gigabitethernet 1/0/1

[SwitchA-vlan10] igmp-snooping enable

[SwitchA-vlan10] quit

# Create VLAN 2 and enable IGMP snooping in the VLAN.

[SwitchA] vlan 2

[SwitchA-vlan2] igmp-snooping enable

[SwitchA-vlan2] quit

The configuration for VLAN 3 and VLAN 4 is similar. (details not shown)
# Configure GigabitEthernet 1/0/2 as a hybrid port. Configure VLAN 2 as the default VLAN. Configure

GigabitEthernet 1/0/2 to permit packets of VLAN 2 and VLAN 10 to pass and untag the packets when

forwarding them.

[SwitchA] interface gigabitethernet 1/0/2

[SwitchA-GigabitEthernet1/0/2] port link-type hybrid

[SwitchA-GigabitEthernet1/0/2] port hybrid pvid vlan 2

[SwitchA-GigabitEthernet1/0/2] port hybrid vlan 2 untagged

[SwitchA-GigabitEthernet1/0/2] port hybrid vlan 10 untagged

[SwitchA-GigabitEthernet1/0/2] quit

The configuration for GigabitEthernet 1/0/3 and GigabitEthernet 1/0/4 is similar. (details not shown)
# Configure VLAN 10 as a multicast VLAN.

[SwitchA] multicast-vlan 10

# Assign GigabitEthernet 1/0/2 and GigabitEthernet 1/0/3 to VLAN 10.

[SwitchA-mvlan-10] port gigabitethernet 1/0/2 to gigabitethernet 1/0/3

[SwitchA-mvlan-10] quit

# Assign GigabitEthernet 1/0/4 to VLAN 10.

Advertising