Adding a device, Adding an authorization condition – H3C Technologies H3C Intelligent Management Center User Manual
Page 23
14
Adding a device
A device can cooperate with TAM to implement TACACS+ authentication and authorization only after
the device is added to TAM.
H3C recommends that you first add devices to TAM for the following reasons:
•
The device is an element in an authorization condition. You must add devices to configure an
authorization condition.
•
Different devices might use different command sets. After you add a device, you can configure a
command set for the device.
To display the page for configuring devices, select User > Device User Policy > Device List, as shown
in
. For more information, see "
4 Performing device-related configuration
Figure 11 Displaying the page for configuring devices
Adding an authorization condition
An authorization condition is identified by the combination of the following elements: device area,
device type, and time range.
A condition that contains one different element is considered a different condition. TAM authorizes
device users according to the conditions.
To display the page for configuring authorization conditions, select User > Device User Policy >
Authorization Conditions, as shown in