H3C Technologies H3C Intelligent Management Center - Manual (Page 59)

50
3. Click the Modify icon for the command set you want to modify.
The Modify Command Set page appears.
For more information about modifying a command set, see "
Adding a command set ."
4. Click OK.
Copying a command set
Copying a command set allows you to create a similar command set, reducing the workload.
To copy a command set:
1. Click the User tab.
2. On the navigation tree, select Device User Policy > Authorization Command > Command Sets.
The Command Set list displays all command sets.
3. Click the Copy icon for the command set you want to copy.
The Add Command Set page appears. The command set name is Copy+source command set.
Other fields are the same as the source command set.
4. Modify the command set parameters.
For more information about modifying a command set, see "Adding a command set."
5. Click OK.
Deleting a command set
You cannot delete a command set that is used by an authorization policy. To delete the command set,
remove the association between the command set and the authorization policy.
To delete a command set:
1. Click the User tab.
2. On the navigation tree, select Device User Policy > Authorization Command > Command Sets.
The Command Set list displays all command sets.
3. Click the Delete icon for the command set you want to delete.
A confirmation dialog box appears.
4. Click OK.